Back to article
3348
ADAPTiQ system setup and deactivation
Find out how to turn on or turn off ADAPTiQ audio calibration. ADAPTiQ optimizes the sound of your system for the acoustics of your room. The contents of your room (i.e. surfaces, furniture, rugs, etc.) impact how sound is heard in the room. The calibration process measures the properties of your room and adjusts the sound of your system accordingly. If you re-arrange your room or move your system to a different room, re-calibrate your system.
To run the ADAPTiQ audio calibration system:
Before you begin, be sure the speakers are connected placed where you want them.
- Plug in the ADAPTiQ headset to the Audio IN jacks on the Acoustimass module
- Put the ADAPTiQ headset on your head. (Tip: Be sure the L and R letters on the headset are above your left and right ears)
- Press and release the ADAPTiQ button on the Acoustimass module to start the calibration process. (Tip: Press the ADAPTiQ button to scroll through the available languages, then press the screen on the SoundTouch Controller to select a language)
- Stand the Acoustimass module on its feet (or as you will position it normally)
- Follow the voice prompts to calibrate your system
- Once complete, unplug the headset
To turn off the ADAPTiQ audio calibration:
On the bass module, press and hold the ADAPTiQ button for about 10 seconds until a message is heard from your speakers to confirm.
Was this article helpful?
Thank you for your feedback!