Back to article
3348
*Default setting shown. To modify the house code of the system, see Changing house code settings.
**These switches function as part of the house code when MDU mode is enabled. For more info, see Setting MDU mode.
Default main room remote DIP switch settings
The switches in the battery compartment of your remote are used for different system configurations. If the switches are accidentally changed or need to return to their original position:
RC18, RC38, and RC1V Main Room Remote DIP Switch Settings
| Switch Label | Setting | Switch Function |
|---|---|---|
| 1 | Down* | House code |
| 2 | Down* | House code |
| 3 | Down* | House code |
| 4 | Down* | House code |
| 5 | Down | Audio stream |
| 6 | Down | Room code** |
| 7 | Down | Room code** |
| 8 | Down | Room code |
| 9 | Down | Room code |
**These switches function as part of the house code when MDU mode is enabled. For more info, see Setting MDU mode.
Was this article helpful?
Thank you for your feedback!