Shop Confidently, knowing we’ll match a lower price – Chat with one of our agents or call 1800-023-367
Stores Cart

Lifestyle® 18 Series II DVD home entertainment system

Sold from 2004 – 2006

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Using Mono Decoding

Mono audio (sound that was created for one speaker) can be intelligently played through the multiple speakers on your system by enabling Mono Decoding. Turn this on if you have mono content that you'd like to hear through all of your system speakers.

Changing the Mono Decoding settings.

Before the Mono Decoding setting can viewed or changed, the Audio Processing settings in the System menu must be set to “User Adjustable.” For information on how to change the Audio Processing settings, see Changing Audio Processing settings. When you have changed the Audio Processing settings to "User Adjustable," change the Mono Decoding setting by following these steps:
  1. Select a source that allows Mono Decoding to be adjusted: DVD, AUX, TV, CBL-SAT or VCR
  2. Press the Settings button on the remote
  3. Press the down arrow to scroll to "Mono Decoding"
  4. Press the right arrow, and then the up or down arrow, to switch from "Off" to "On"
Note: Mono decoding remains set, until the system is turned off or the source is changed. When the system is turned off, it returns to its default state of “Off.”
Was this article helpful?
Submit
Thank you for your feedback!