Back to article
3348
When connecting a Bluetooth device as described above, you can only connect to one device at a time.
Reconnecting a Bluetooth device that you have already connected.
Your product remembers the last several Bluetooth devices it was paired to so that it can quickly and automatically reconnect to them. This is useful if your product connects to a different device when you turn it on, or if you just want to switch to a different device.
To select a Bluetooth device that you previously connected:
- WIth your headphones powered on, push the Power switch all the way up and then release it to hear which device is selected.
- Within two seconds, push the Power switch up again and release it to select to the next device in memory.
- Repeat step 2 until you hear the name of the device you want to connect.
When connecting a Bluetooth device as described above, you can only connect to one device at a time.
If you are unable to connect a Bluetooth device.
See troubleshooting for Cannot connect a Bluetooth device.
Was this article helpful?
Thank you for your feedback!