Shop Confidently, knowing we’ll match a lower price – Chat with one of our agents or call 1800-023-367
Stores Cart

Replacing the cover

To replace the cover, follow these steps:

Using the 2.5 mm hex wrench supplied with the replacement cover, remove the two screws at the bottom of the speaker

Push up on the back of the cover until it slides up and loosens

Remove the existing cover by pulling the cover up and away from the speaker back

Install the new cover by aligning the holes in the cover with the anchor posts on the back of the speaker, and press the cover into place

Slide the cover down on the anchor screws until it stops

Replace and tighten the screws on the bottom of the cover