Using the System menu, the following system settings can be adjusted as needed.
Using your System menu
Audio
Note: Listening to an audio source while you make audio adjustments can be useful in fine-tuning your selections.
Bass compensation: low-frequency reproduction, default is set to normal (0), can vary from -9 to +14
Treble compensation: high-frequency reproduction, default is set to normal (0), can vary from -9 to +14
Audio processing: "Automatic" can be changed to "User adjustable," which allows additional options in the settings list
Input levels: analogue or digital input from TV, VCR, CBL-SAT, or Aux, default is set to normal (0), can vary from -6 to +6. Allows you to set your device volume levels to be balanced with internal source volumes
ADAPTiQ®: Bose® technology that customises sound to your room. Requires supplied headset
Expansion protocol: not for use unless it is indicated by a Bose technician. Only used with legacy Bose products
CBL-SAT/DVD audio: can be set for TV stereo instead of 5.1 reproduction
DVD audio priority: select the audio input priority for your DVD source
CBL-SAT audio priority: Select the audio input priority for your CBL-SAT source
Video
TV power: the media console can turn your TV on automatically whenever you select a video source
TV power status: the TV sensor can be detected if your TV is ON or OFF. Position it behind your TV until "NOT DETECTED" changes to "TV ON"
Widescreen TV: tells the media console if you have a widescreen TV
TV video format: allows you to set the video format for a US or European TV
Video black level: the intensity of black on screen can be darkened
Video resolution: set the resolution of incoming video signals as adjustable or fixed
Persistent video: determines if video from DVD, CBL·SAT, VCR or Aux remains on screen when you switch to an audio source
Settings on TV: controls where the settings menu is displayed
Media Centre
Display brightness: adjusts the brightness level of the display panel
Display language: can change from English to one of eight other languages
Coaxial source: assigns the coaxial digital connection to one source
Tuner spacing: can change from one standard station spacing for AM and FM to a different regional standard
Restore settings: Reverts all your settings back to the factory defaults
Remote Control
TV brand and code plus device, brand, and code for CBL· SAT, VCR and Aux: the choices you make here allow the remote to control each device
TV control: determines which video source is displayed and controlled when TV is selected
Remote version: describes your type of remote control. The functionality of these buttons can be changed
IR control: allows some IR remote controls to operate the system
Setup
Select "Setup" to access common setup options