Order by 1 PM, Dec 14 AEST with free shipping for delivery by Dec 24 for metro areas. In-stock items only.

Understanding the system control buttons

You can operate your SoundLink® speaker by using the control buttons located on the top of the speaker. The following is a description of the buttons.

POWER: Press to turn the speaker ON or OFF. Press and hold to check the battery status.

Aux: Press to select the external audio device connected to the Aux input.

Bluetooth®: Press to select the Bluetooth® source. The speaker attempts to connect to the last paired device.

If you want to use a different device, press and hold for 3 seconds to set the speaker to discoverable mode. This will allow pairing with another Bluetooth® device.

When a device is connected (paired), press to disconnect the paired device. The SoundLink® speaker then waits for another paired device to connect. If no device connects within 30 minutes, the speaker turns itself off.

MUTE: Mutes sound from the speaker.

VOLUME UP: Press the plus button to increase the speaker volume.

VOLUME DOWN: Press the minus button to decrease the speaker volume.

Note: The source indicator on the front panel flashes once each time the plus or minus button is pressed. The indicator flashes twice when maximum or minimum volume is reached.

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided