Order by 18 December to get your delivery by Friday 22rd December 2017.
 

Speaker will not turn on when connected to AC power

Applies to:

  • SoundLink® Mini Bluetooth® speaker II

Please try the following to resolve this issue:

Make sure your speaker is connected to a working AC (mains) outlet

Make sure you are using the Bose® power supply that was delivered with your speaker, or a Bose® accessory charger

If you are using a surge protector, try plugging directly into a working wall outlet

Visit http://btu.bose.com/ to see if your product has the latest firmware

If the above steps are not successful, you can also try temporarily putting the speaker into "Ship mode", which will reboot the internal processer. To put the speaker into Ship mode, follow these steps:

Connect the speaker to power

Press and hold the Multi-function button for 10 seconds

While continuing to hold the Multi-function button, unplug the speaker from power

Release the Multi-function button

The product is now in Ship mode. This is essentially a fully "off" state and it will have no power or functionality. To take the product out of Ship mode and wake it up, just connect it to power. We recommend you allow it to charge for at least one hour.

Note: Putting the system into Ship mode reboots the processor, but does not erase any settings, such as language selection or paired Bluetooth devices.

Was this helpful?

Submit

Thank you for submitting your comments.