Your system has two independent alarms. Each alarm can be set for:
Wake-up source: buzzer, radio or CD
Using the alarm buttons on the bottom of the remote, you can setup and operate each alarm.
press to turn alarm 1 on or off.
press to turn alarm 2 on or off.
press to activate the alarm setup mode and view alarm 1 settings. Press again to view alarm 2 settings. Press again to exit the alarm setup mode.
The upper right-hand corner of the display shows the alarm status indicators if the alarm is set. In the example below, Alarm 1 is set to 6:30 am, and Alarm 2 is set to 7:15 pm.
You can choose the settings for each alarm by activating the Alarm Setup mode and displaying the settings for the alarm you want to change.
To set an alarm: