Ear cushion replacement

Applies to:

QuietComfort® 15 Acoustic Noise Cancelling™ headphones

The earcup cushions are held in place by a mounting flange. This flange snaps under small tabs located around the inside rim of the earcup.

If an earcup cushion becomes partially or completely detached, push its mounting flange back into the earcup. Then press around the edge of the mounting flange, making sure the cushion snaps into place all the way around the earcup.

To replace earcup cushions, follow these steps:

Remove the cushion by simply pulling it off of the outer lip of the earcup. Do not remove the earcup lining material

Fit the mounting flange of the replacement cushion onto the outer rim of the earcup

Make sure it attaches smoothly and uniformly onto the entire earcup and snap it gently into place