Shop Confidently, knowing we’ll match a lower price – Chat with one of our agents or call 1800-023-367
Stores Cart

Adding another music source

You can use another audio device, such as a portable digital music player, with your SoundLink® speaker. This requires using an audio cable with a 3.5 mm plug on one end to connect with the Aux input on the SoundLink® system. This type of cable is available for purchase at electronics stores.

To use an external audio device, follow these steps:

From the external audio device, insert the 3.5 mm plug into the Aux jack located on the back of the SoundLink® speaker

On the speaker, press AUX

Aux

Adjust the volume on the connected device to near maximum, then use the SoundLink® speaker volume buttons to adjust the volume level

Note: If a device is connected but not playing audio, the speaker will turn itself off after 30 minutes.

Regarding the SERVICE connector

The SERVICE connector on the rear of the speaker is for software updates only and will not play audio from any connected device.